Perle S 10GRT-SFP Media Converter Installation Guide
7
Sequence of Events
1.
Media Converter
A
loses fiber connection (RX).
2.
Media Converter
A
notifies the remote Media
Converter that there is a fault on the Link.
3.
Media Converter
B
detects loss of fiber link on
receiver (RX).
4.
Media Converter
B
turns off transmitter (TX).
Cut-through / Rate converting (Switch 3)
Switch Position Type
Up (default)
Rate converting
Down
Cut-through
Rate converting:
Both ports can operate at the
same or different speeds.
Cut-through:
Both ports need to be the same
speed and set to full duplex mode.
Fiber Interface Loopback (Switch 4)
Switch Position Mode
Up (default)
Disabled
Down
Enabled
Disabled
: When disabled, the media converter will
not be in Fiber loopback mode.
Enabled:
When enabled, the media converter will
be in Fiber loopback mode.