Fast Ethernet Media Converter – Installation Guide
2
Overview
This document contains instructions necessary for the installation and
operation of the Perle Fast Ethernet Standalone Media Converters
(S-100). These products convert a 100Base-TX cable connection
(copper) to a 100Base-X connection (fiber). The fiber connection can
be either single mode (SM) or multimode (MM) and can operate over
different wavelengths and distances, depending on the model
selected (see table below).
Model
Connector
Mode - Distance
Wavelength
S-100-M2xx2
SC/ST/LC
MM - 2 km/1.2 mi.
1310 nm
S-100-S2xx20
SC/ST/LC
SM - 20 km/12.4 mi.
1310 nm
S-100-S2xx40
SC/ST/LC
SM - 40 km/24.9 mi.
1310 nm
S-100-S2xx80
SC/ST/LC
SM - 80 km/49.7 mi.
1550 nm
S-100-S2xx120
SC/ST/LC
SM - 120 km/74.6 mi
1550 nm
S-100-S1SC20U
SC
SM - 20 km/12.4 mi.
1310/1550 nm
S-100-S1SC20D
SC
SM - 20 km/12.4 mi.
1550/1310 nm
S-100-S1SC40U
SC
SM - 40 km/24.9 mi.
1310/1550 nm
S-100-S1SC40D
SC
SM - 40 km/24.9 mi.
1550/1310 nm
Note: Please refer to Perle’s web site for the most up to date
Installation guides, models and specifications:
http://www.perle.com/
