IOLAN SDG1 LA/LE Hardware Installation Guide
Operation
Resetting the IOLAN
To reset the IOLAN insert a paper clip into the inset hole labelled as “Reset” and gently
press inwards. The Power/Ready LEDs on the IOLAN SDG1 LA/LE will go ON and then
momentarily OFF when released to show that the unit has been reset.
Resetting the IOLAN to Factory Default Configuration
To reset the configuration of the IOLAN, insert a paper clip into the inset hole labelled as
“Reset” and hold the reset button between 3 and 10 seconds, the IOLAN will reset the
configuration to factory default (either the Perle or custom default configuration). If you
hold the reset button greater than 10 seconds, then the IOLAN will reset the configura
-
tion to the Perle factory default configuration.
Configuring the IOLAN
The IOLAN can be configured, operated and monitored using any of the following
methods. See the IOLAN Secure User’s Guide for more details.
CLI
A text-based Command Line Interface based on industry standard syntax and structure.
The CLI can be accessed from the console port. An IP address is not required for CLI
access on the console port. Once an IP address has been assigned the IOAN can also be
accessed by Telnet, SSH, SNMP or the Web interface.
Web Manager
The Perle Web Manager is an embedded Web based application that provides an easy to
use browser interface for configuring ans managing the IOLAN. Once an IP address has
been assigned/configured on IOLAN, it can be accessed through any standard desktop
web browser.
Device Manager
This windows-based utility provides the ability to do either an initial setup (out of the
box) or to configure and manage the IOLAN. In order to use this utility the IOLAN must be
connected to your network. You can download the Device Manager software from our website
at
www.perle.com.
