IDS-108FPP Installation Guide
2
Overview
This document contains instructions necessary for the
installation and operation of the Perle IDS-108FPP
unmanaged Ethernet switch. This Ethernet switch is a
8-port RJ-45 switch with PoE/PoE+ capabilities on
ports one through four. The PoE/PoE+ Ethernet ports
function as (PSE) Power Sourcing Equipment and can
each independently power a PD (Powered Device)
using standard UTP cables that carry Ethernet data.
Powered Devices must comply with the IEEE 802.3af
or the 802at-2009 standard for PoE or PoE+ devices.
The IDS-108FPP is available in various copper and
fiber configurations (see table below). The fiber ports
can be either single mode (SM) or multimode (MM)
depending on the model selected and can operate over
different wavelengths and distances. Visit the Perle
website for the most up to date installation guides,
models and specifications.
http://www.perle.com/
Note: xxxxxxxx(XT) indicates models numbers for this
product line.
TP = twisted pair
XT = Industrial Temperature models
Model
Port 1-4
Port 5 - 8
Port 9 and 10
IDS-108FPP
TP (RJ-45)
PoE/PoE+
TP (RJ-45)
empty
IDS-108FPP-xxxxxxxx
TP (RJ-45)
PoE/PoE+
TP (RJ-45)
1 or 2 fiber ports
(SC or ST)
IDS-108FPP-XT
(Industrial Temperature
Model)
TP (RJ-45)
PoE/ PoE+
TP (RJ-45)
empty
IDS-108FPP-xxxxxxxx-XT
(Industrial Temperature
Model)
TP (RJ-45)
PoE/PoE+
TP (RJ-45)
1 or 2 fiber ports
(SC or ST)
