IDS-108FPP Installation Guide
15
Ethernet Copper Cabling Requirements
•
Category 5 UTP or STP, 5e cables
•
24-22 AWG
•
Straight through or Ethernet crossover cable
Connect the copper cables from each TP port (RJ-45)
on the IDS-108FPP switch to Ethernet-enabled
devices.
See below for 8 pin RJ-45 pinouts.
Remaining pins not used
Fiber Port Cabling Requirements
Duplex SC or ST connector
•
Multimode 50/125 or 62.5/125 micron fiber cable
•
Single mode 9/125 micron fiber cable
Simplex (BIDI, single strand) SC connector
