105F Installation Guide
- 5 -
Power
The IDS-105F switch has two power inputs that can be
connected simultaneously to DC or AC power sources. If one
power source fails, the other acts as a backup, and
automatically powers the switch.
Reset Button
To reset the IDS-105F insert a paper clip into the air hole vent
and gently press the reset button. The LEDs on the IDS-105F
will go On and then momentarily Off when released to show
that the unit has been reset. All links will be dropped and the
MAC tables will be cleared.
LED Status
P1 / P2– Power (Green LED)
•
On: Power present
•
Off: No Power present
Fiber Port 5 (Green LED)
•
On: Link up
•
Flashing: Link up and Ethernet activity detected
•
Off: Link down
Summary of Contents for IDS-105F
Page 1: ...P N 5500338 10 Rev H Perle IDS 105F XT Unmanaged 10 100 Ethernet Switches Installation Guide...
Page 4: ...4 105F Installation Guide Front View of IDS 105F with one fiber port Top view of the IDS 105F...
Page 7: ...105F Installation Guide 7 Dimensions for the IDS 105F...
Page 8: ...8 105F Installation Guide...