105F Installation Guide
- 13 -
Ethernet Copper Cabling Requirements
•
Category 5 UTP or STP
•
24-22 AWG
•
Straight through or Ethernet crossover cable
Connect the copper cables from each TP port (RJ-45) on the IDS-
105F switch to Ethernet-enabled devices. See below for pinouts.
8-pin RJ-45
Remaining pins not used.
Fiber Port Cabling Requirements
MM:
50/125 microns or 62.5/125 microns
SM:
9/125 microns
Connect the fiber cable to Port 5 on the IDS-105F and the
other end to a compliant fiber device. If you are making your
own fiber cables, remember that the RX on one side needs to
go to TX on the other side and vice versa. See diagram below.
RX
TX
RX
TX
Summary of Contents for IDS-105F
Page 1: ...P N 5500338 10 Rev H Perle IDS 105F XT Unmanaged 10 100 Ethernet Switches Installation Guide...
Page 4: ...4 105F Installation Guide Front View of IDS 105F with one fiber port Top view of the IDS 105F...
Page 7: ...105F Installation Guide 7 Dimensions for the IDS 105F...
Page 8: ...8 105F Installation Guide...
