Perle 10G Media Converter module Installation Guide
2
Overview
This document contains instructions necessary for the installation
and operation of the Perle 10G Media Converter modules that are
used in conjunction with a Perle Media Converter chassis. Each
module contains two pluggable transceiver ports that permit
connections of SFP+ fiber, XFP fiber and copper modules. The C
model modules are the unmanaged modules and the CM models
are the managed modules. For information on the management
options of the CM modules refer to the Perle MCR-
MGT User’s
Guide that came with your Perle Management Module. The C/CM-
10G modules support low power transceivers, whereas the C/CM-
10G-XTSH and C/CM-10G-XTXH support high power (power level
4) transceivers. The high power modules take two slots within a
Perle Media Converter chassis. All combination of modules within
the chassis cannot exceed the chassis power input consumption.
The full power consumption for Perle Media Converter chassis can
be found on the Perle website.
Note:
The C/CM-10G media converter modules can be populated
with two 1G fiber/copper modules to operate at 1G. However with
1G modules the C/CM-10G does not support the Loopback Auto
Detect feature
.
Models
Port 1
Port 2
CM-10G-STS
SFP+
SFP+
C-10G-STS
SFP+
SFP+
CM-10G-XTS
XFP
SFP+
C-10G-XTS
XFP
SFP+
CM-10G-XTX
XFP
XFP
C-10G-XTX
XFP
XFP
High Power
Models
Port 1
Port 2
CM-10G-XTSH
XFP
SFP+
C-10G-XTSH
XFP
SFP+
CM-10G-XTXH
XFP
XFP
C-10G-XTXH
XFP
XFP
