Perkins M190C, Installation Manual

Page: 52 / 82

Chapter 8 N40475
Page 42
Cold start system
Cold start data 12V and 24V
Temperature
Battery type with oil viscosity used
Start aid type
Min average
cranking speed
rev/min
Total battery
voltage nominal
20W 15W 10W 5W 0W
5°C F Glow plugs 130 12V
-25°C 2 X B Glow plugs 100 12V
-40°C 2 X E
Glow plugs and
block heating
100 12V
Battery performance
Battery Selection Tables By Engine-Results For Bare Engines based on min required speed of 100 rpm
Engine tested with 75% state of charge batteries and 1.7 mω cable resistance
Starter information Temperature & oil grade without glow plugs
Voltage Starter type -5 O C 15W40
12V Iskra AZF 950
24V Iskra AZF 650
Commercial reference number Perkins code
Battery minimum performance
BS EN 50342
(1)
SAE J537 (BCI)
(2)
DIN 43539
(3)
643 A 440 640 400
647 B 510 700 465
069 D 340 540 300
655 E 570 760 490
621 F 860 900 505
(1) Voltage no less that 7,5V after 10 seconds, 6V after 90 seconds at -18
O
C (0
O
F) across each 12V battery.
(2) Voltage no less than 7,2V after 30 seconds at -18
O
C (0
O
F) across each 12V battery.
(3) Voltage no less than 6,0V after 150 seconds at -18
O
C (0
O
F) across each 12V battery.
Battery to starter lead resistance
The resistance of the lead(s) used between the battery/batteries and the starter motor must not be more than
0.0017 ohms for 12V systems and 0.0034 ohms for 24V systems. More detailed information on types of battery
is available from the Wimborne Marine Power Centre.