i03434106
ECM Harness Connector
Terminals
The Electronic Control Module (ECM) uses
connectors that have 64 terminals to interface to the
wiring harness.
Illustration 13
g01784773
Layout of the Connector Pins (view from the rear)
Removal and Installation of the
Harness Connector Terminals
Terminal Removal
Table 6
Required Tools
Part Number
Part Description
Qty
27610285
Removal Tool
1
Illustration 14
g01784793
Removal of Terminal Position Assurance
Components
1.
Remove the connector from the ECM. Refer to
Disassembly and Assembly, “Electronic Control
Module - Remove and Install”.
2.
Use a screwdriver that has a flat blade (1) to
remove the two terminal position assurance
components (2) from the connector (3).
Note:
Do not use the removal tool to remove the
terminal position assurance components.
Illustration 15
g01784822
Removal Tool
3.
Insert the removal tool into the hole that is adjacent
to the terminal in order to release the locking
device.
Note:
Make sure that the tool stays perpendicular to
the face of the connector.
26
UENR0678