L1050069A
13
3.
In the external detector area, click the
symbol, so that it becomes
.
NOTE: If an NIR source is being used and the detector type is not either a Custom type or
NIR, a warning message is displayed informing you that the detector may be
damaged by the NIR beam.
You should only select the Yes option, to continue, if an attenuator has been fitted in
the beam or you are confident that the detector can withstand the infrared energy
that will be directed at it.
The external detector is selected.
The Right-hand External Beam Option is indicated by the baseplate icon
at the top
right of the Scan and Instrument Setup dialog.
