Copyright
This manual is published by OMNI International a PerkinElmer company, 935 Cobb Place Blvd, Kennesaw, GA
30144 USA. Copyright 2020, OMNI International, Inc. All rights reserved, including but not limited to those
rights to reproduce this publication or parts thereof. Reproduction of this publication or parts thereof, or the
products it describes, by any means or in any form is expressly prohibited without the written permission
of OMNI International.
Trademarks
OMNI International is a registered trademark of OMNI International. All other trademarks are the property of
their respective owners.
Proper Equipment Operation
To reduce the risk of electric shock, do not remove the cover. No user serviceable parts are inside. Refer to
qualified service personnel if help is required.
Use this product only in the manner described in this manual. If the equipment is used in a manner not
specified by the manufacturer, the protection provided by the equipment may be impaired.
FCC
This device complies with part 15 of the FCC (United States Federal Communications Commission) Rules.
Operation is subject to the following two conditions:
• This device may not cause harmful interference, and
• This device must accept any interference received, including interference that may cause
undesired operation.
CE
This device complies with all CE rules and requirements.
Changes or modifications to this equipment not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Specifications
Input Voltage
19-042E 120V, 50-60Hz /19-042E 230V, 50-60Hz +/-10%
Input Current
10A max
Power Connector
IEC 60320 C13
Fuse
6x30 mm / 10A max
Fan
40x10 mm 5Vdc / 140mA
Overvoltage Category
II
Pollution Degree
2
Altitude
Up to 2000 m
For Indoor Use Only
Table of Symbols
Symbol
Description
Symbol
Description
Caution. Refer to the User documenta-
tion. (ISO 7000-0434B)
On (power). |(IEC 60417-5007)
Hazardous voltage; risk of electric
shock. (IEC 60417-6042)
Off (power). (IEC 60417-5008)
Fuse. (IEC 60417-5016)
CE compliance mark.
Alternating current. (IEC 60417-5032)
Consult Instructions for Use. (ISO 7000-
1641)
WEEE symbol (EN50419:2005).
