PerkinElmer Frontier IR, User Manual

Page: 41 / 104

Unpacking and Installation . 41
Other connectors
The communication ports for peripheral devices are shown in Figure 13.
Figure 13 Communication ports
Legends and icons that identify the function of each of the ports are printed on the hinge
molding directly above the port.
CAUTION
Do not attempt to connect a monitor to either the EXT.R port or the
MICROSCOPE port or you will cause serious damage to the instrument
when it is switched on.
Connector details
Icon Description Connector
Type
Voltages Maximum
Currents
10101
Serial port. Connects a PC to the
instrument using an RS232
interface cable. This connector is
only used for service diagnostics.
9-way
D-type
+12 V <100 mA
−12 V <100 mA
General Purpose Optical Bench
(GPOB). Allows synchronization
between the instrument and an
external accessory.
26-way
high density
D-type
+5 V <50 mA
Spt.Lt
Spotlight. Used to connect the
instrument to a Spotlight
Imaging System.
11-way mixed
D-type
+5 V <100 mA
±12 V 50 mA
Sample area purge
Instrument purge
10101 Spt. Lt.
EXT.R