Perin WeighMaster Farm Scale 700, User Handbook Manual, Page: 8 / 20

Indicator mod. 700/710
6
USE AS SIMPLE WEIGHT INDICATOR
Switch the indicator on with the key and wait for a few seconds. After the HELLO
message, the indicator shows the model and the version and prepares itself for direct reading.
Load and you will immediately read the value corresponding to the loaded weight.
NB: in the beginning it might be necessary to adjust the zero, because the mechanical parts
of the system need some time to settle.
ZEROING (TARE)
Switch the indicator on, after a few seconds a value will be displayed. Keep the key
pressed until the display shows the message tArE. The indicator goes automatically to zero.
PARTIAL WEIGHINGS
To make loading of different ingredients easier, without using the alarm, press and
the display will visualize "0" with an indicator which will set on NET. Load the ingredient,
press again and the indicator will move to TOTAL so that the total loaded weight will
be shown. Follow this procedure for all the partial weighings (loading and unloading).
SELECTION OF FUNCTIONS
To change the function you only need to press .
The fixed announcer will move showing each time the selected function:
TOTAL / NET / EXECUTION / PROGRAMMING / STORAGE.
PROGRAMMING RATIONS
FarmScale Mod. 700/710 has a memory able to store programmes of 20 recipes of 20
ingredients each, which can be used for loading and unloading.
When executing the ration, the indicator automatically recognizes if a loading or unloading
is being carried out (LOAD/UNLO announcers); there will be an alarm both for loading and
for unloading. It is therefore possible to use the programming of recipes to manage different
unloading groups, too.
There are two different ways of setting the programming:
- in total values (the ingredients are expressed in total kilos)
- proportional to the number of animals (the ingredients are expressed per animal)
To write, recall, check and execute the programme, use the keys placed on the frontal panel.
The user should prepare a list of all the ingredients with their values in order to program the
recipe in a correct way.
PROGRAMMING LOADING IN TOTAL VALUES
The ingredients are introduced in total Kg. After the ration has been entered, before executing
it, it is still possible to change the total value with automatic adaptation of components.
e.g. - program the recipe n. 1 composed of the following ingredients: n. 1 of 110 kg, n. 2 of
225 kg, n. 3 of 1120 kg and n. 4 of 120 kg. Proceed in this way: switch on the indicator and
wait for a few seconds.