Start using the mouse
Copyright
2003 Perific AB 7
Start using the mouse
Step 1 – Insert the batteries
Use the supplied batteries. Batteries other than NiMH are not recommended.
1.
Remove the battery cover.
2.
Insert the batteries
according to the instructions
on the mouse.
3.
Replace the battery cover.
Step 2 – Select the correct size battery cover for your hand
The mouse is supplied with three differently sized battery covers,
small,
medium (as
supplied)
and
large
. With the different battery covers you can adjust the size of the
mouse to the size of your hand so that it feels comfortable when not using it on the
desktop.
1.
Place the mouse in the left hand
.
2.
Test the mouse
by switching between the
different sizes of battery covers until the
mouse fits comfortably, without being too tight
or too loose.
Step 3 – Connect the receiver/charger to the computer
Communication between the receiver and the mouse makes use of radio waves;
this means that a “line of sight” placement is not required.
1.
Turn on the computer
2.
Connect the receiver’s USB plug
into an
available USB jack on the computer.
3.
Place the receiver
close to the area where
you will use the mouse. The effective range is
approx. 1,5 meters.
Summary of Contents for Wireless Dual Mouse
Page 1: ... USER S MANUAL FCC ID RKJB70 ...
Page 2: ...English Manual ...