Perific Wireless Dual Mouse User Manual Download Page 14

Additional Information 

14 

Copyright 

 2003 Perific AB  

The mouse 
does not  move 
smoothly when 
used on a 
surface 

• 

The mouse is insufficiently charged. See section 

Step 4 – 

Charging the mouse.

 

• 

The receiver is placed too far away from the mouse. See 
section 

Step 3 – Connect the receiver/charger to the 

computer

 for correct placement. 

• 

You are using the mouse on too dark or shiny a surface. 
Use a mouse mat. 

• 

Radio communication needs to be synchronised.  See 
section 

Step 5 – Synchronise the mouse with the receiver.

 

The mouse has 
a bad reach 

• 

The mouse is insufficiently charged; see section 

Step 4 – 

Charging the mouse.

 

• 

The receiver is placed too far away from the mouse. See 
section 

Step 3 – Connect the receiver/charger to the 

computer

 for correct placement. 

The optics 
shines even 
though the 
mouse is not 
sitting on a 
surface. 

• 

The sensor that detects whether a mouse is lying on a 
surface may be dirty or blocked. Try cleaning the sensor 
with a small brush.  

• 

Avoid touching the optics at the bottom of the mouse with 
your fingers. 

The operating 
time is short 

• 

The batteries are faulty. Switch the batteries. See section 
Step 1 – Insert the batteries 

Support 

Support information can be found at 

www.perific.com

 and 

www.perific.se

. Here you 

will also find contact information and other additional help and guidance. The 
website is updated continuously and will help you take full advantage of the 

Wireless Dual Mouse

Advanced settings 

This section is intended only for advanced users who would like to reconfigure the 
basic settings of the mouse such as the functionality of the buttons or the sensitivity 
of the mouse. 

In Windows click 

Start

 and choose 

Control panel/Mouse

. Here you will find several 

properties you can set such as mouse button functions, speed and even 
acceleration. Adjust these parameters to your liking. For more information about the 
mouse drivers that are installed on your computer we would refer you to the manual 
for these drivers. 

For enthusiasts there is a special mouse driver with additional functionality and 
configuration possibilities that can be downloaded at 

www.perific.com

 or 

www.perific.se

. More information about mouse drivers can be found in section 

Accessories

.  

Summary of Contents for Wireless Dual Mouse


















Reviews: