15
Application
Brief overview of the key functions
The hand-held measuring instrument al-
lows a simple and structured measuring
procedure using only 4 operating buttons.
“Up”
– Select menu item or setting
“Down”
– Select menu item or setting
“Measure”
– switch on / off (> press for 1 second)
– carries out a measurement
– selection of a menu item
– saving and activating a setting
“Settings”
– activate settings (> press for 1 second)
– end settings
– back to menu items
For concretes, the standard calibration
curve - “Cal. No.: 4” - is generally preset.
When the hand-held measuring instru-
ment is switched on, it indicates that the
device is preset to Cal. No. 4.
This setting should not be changed unless
another material is being measured in-
stead of fresh concrete.
SONO WZ
Translation of the Original Instructions for Use
Fig. 2
Measure
Down
High
Settings
Operating Elements
