P a g e
| 5
1.
Attaching beams to post. Notice the marks
on inside of beams. Turn that in. Put it at the
outside of post. The outside beam attach it with
2 4" white head screws. Inside beam attach it
with 3 3½" screws put it in center of post so
your return beam will cover it.
SECTION 2 – Beams
NOTE: Additional help is needed when setting the beams. They are not heavy, but need to be
moved before attaching. A helper will keep them from being dropped.
NOTE: If the Pergola is over 16' and there is a middle post, both beams will need to be attached
to the middle posts. Not Shown. The splice where they come together must meet on the notch of
the posts. Trim is sent to cover the seam. Any questions, please call 1-888-293 2339.
2.
After the posts are plumb and the beams are
correctly positioned, go back and add an
additional 4" screw to each of the beams (2
screws per connection).
Image at right shown 36" base trim
3.
After you have your beams up, put your return
beams in. Fasten to header with four 4" white
head screws.
4.
After the return beams are in, fasten your
braces to post and return beam. You will have
2 different sizes of braces. You will want the
smaller ones. Turn your screws in your brace
to the inside of pergola. Fasten with 4 6"
timberlock screws.
Summary of Contents for VINYL CLASSIC FREESTANDING PERGOLA
Page 8: ......