P a g e
| 4
10.
Attach the sleeve to the post with one 2 ½"
white headed screw (as shown to right.) Do
this for all posts.
ADDITIONAL STEPS for 36" Post Trim - If the 36" bottom post trim sections have not been
purchased skip to the next section.
1.
With each post secured, slide the bottom
post trim sleeve and bottom trim ring over
the post. Do not secure them at this time.
2.
Slide the post sleeve over the wooden post.
Be sure that the notches and the cutouts
on the sleeve align. NOTE: The top of the
vinyl sleeve has a composite vinyl cap. This
insures that the post sleeve is at the proper
height.
3.
After the post vinyl sleeve is in place, slide
the top trim over the sleeve and down to
the top of the base trim. This is a tight fit
to prevent leaking. The cap will snap into
place.
Summary of Contents for VINYL CLASSIC FREESTANDING PERGOLA
Page 8: ......