6
Place
t
he End Cap near by to re-install again
later.
This is for Alpine Pavilions only. Locate
Mounting Blocks and place the Blocks on the
second Rafter in from the outside. Use a speed
square to align Mounting Block with Post
Remove the End Cap from the Curtain
A
ssembly.
Begin by placing the Curtain Assembly close
to the project site.
Carefully remove protective shrink wrap from
the Curtain Assembly and remove all parts.
Fasten Mounting Blocks to the Rafter using
3’’ Brown Head Screws through all predrilled
holes.
