Pergola kits USA HOMESTEAD PERGOLA, Assembly Instructions Manual, Page: 7 / 12

5
12.) When both return beams are installed,
fasten both header and post to return beam
using (2) 8” GRK screws. Continue this step
for all four corners. Anchor remaining Posts to Concrete
13.) Sliding the base up towards the top you
can fasten it to the post with a screw to keep
it from falling down. Make sure the posts are
level and still at the L-shaped pencil mark.
Screw the second bracket to the post using
(5) 2 ½” screws. It does not matter which side
of the post, however we recommend going
caddy-corner. Keep in mind you should stay
approximately 4” away from the edge of the
concrete. Refer back to step 6 for setting the
brackets. Once completed remove the screw
and place the base in its correct position.