Pergola kits USA HOMESTEAD PERGOLA, Assembly Instructions Manual, Page: 10 / 12

A U-shaped piece of trim is included that will cover the
tops of the posts, and also hide the ends of the lag bolts. Sit
this on top of the post, and attach with 4 (2 ½") screws, at an
angle.
If installing vinyl posts, the final step is to
attach the top and middle trim pieces. Using 2
painted head screws, attach the top trim to the
wooden ring.
Measure down from the top middle trim ring
12" below the top trim. Make sure that the trim for
each of the posts are the same measurement down
from the top. Attach with 2 painted screws from the
top down.
For the bottom trim, attach to the post with 2
screws, or simply let it sit on the ground.
The Oasis Pergola is now complete. A few notes concerning options are included below. Depending on
the option, there may be a separate sheet explaining the option. If the option or the pergola itself is
custom, these instructions may be hand written. Be sure to call your project advisor with any questions.

Canopies – A retractable canopy, if ordered, will come with separate instructions. It is very
important that the pergola is assembled correctly in order for the canopy to be assembled, since
it was made to attach to this model.

Steel Panels – If steel panels were ordered for the top of the Oasis Pergola, they generally will
replace the top runners, although they can also be ordered to sit on top of the top runners. The
spacing of the main runners is important to ensure that the panels fit correctly.

Privacy Panels – Come with separate instructions.
P a g e | 10
18.) Install U-shaped trim on outside out post.
A U-shaped piece of trim is included that will
cover the tops of the posts, and also hide the
ends of the lag bolts. Sit this on top of the
post, and attach with (4) 2 ½” screws, at an
angle.