Perge MC 5.20 CI, Installation And User Instructions Manual, Page: 3 / 12

3 Overview
Conformity
Thank you for purchasing a boiler from the Perge range of central heating boilers, please take time
to read the following guidance instructions on how to install and use your new boiler. It is important
that these guidelines are followed in order to give optimum performance from your new Perge boiler.
IMPORTANT: FOLLOWING INSTALLATION, PLEASE ENSURE THAT THESE INSTRUCTIONS ARE LEFT WITH THE USER
FOR FUTURE USE AND SERVICING.
To maintain the boilers high thermal efficiency and give trouble free operation, it should be serviced annually by
a suitably qualified heating engineer. THIS I S ALSO A CONDITION OF THE PRODUCT GUARANTEE.
Please contact Perge should you need help in finding an engineer.
All electrical work should be carried by a qualified electrician, in accordance with the latest regulations. Before
attempting any work on the boiler or system controls, ensure the mains supply is disconnected.
The boiler can be connected to most normal heating systems, but should there be any doubt in the application
please call Perge for further information. As it is a continuously burning appliance, it should be connected to a
heat-bleed device (such as a radiator) to dissipate any heat produced, due to a system pump failure. It is also
advisable to connect the integral 'Quench Coil' fitted as standard to all Perge MC series boilers.
This appliance must be installed in accordance with current Building Standards and Regulations, by an approved / com-
petent person.
The MC 5.20 CI and MC 5.30 CI both conform to European Directive:
EN 303-5
MC CI model range
MODEL CODE
MC 5.20 CI 902 007
MC 5.30 CI PF 902 011
MC 5.30 CI GF 902 020