5
RULES FOR SAFE OPERATION
KNOW THE TOOL
To operate this tool, carefully read this Owner’s Manual and all labels affixed
to the angle grinder before using. Keep this Manual available for future
reference.
IMPORTANT
This tool should only be serviced by a qualified service technician. For more
information, call the toll-free helpline:
1-866-858-2664.
GENERAL SAFETY RULES FOR ALL POWER TOOLS
WARNING:
Read and understand all instructions. Failure to follow all instructions
listed below may result in electric shock, fire and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
WORK AREA
Keep your work area clean and well lit.
Cluttered benches and dark areas
invite accidents.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust.
Power tools create sparks
which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
Double insulated tools are equipped with a
polarized plug (one blade is wider than the other.)
This plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician to install a polarized outlet. Do not
change the plug in any way.
Double insulation
eliminates the need for the three-wire grounded
power cord and grounded power-supply system.
Avoid body contact with grounded surfaces, such
as pipes, radiators, ranges and refrigerators.
There
is an increased risk of electric shock if your body is grounded.
Don’t expose power tools to rain or wet conditions.
Water entering a power
tool will increase the risk of electric shock.
120V
~ 60
Hz
