Performax 241-0510 Owner'S Manual Download Page 28

 

28 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Rev 1.8    29/03/2011

 

PERFORMAX

®

 12 V CORDLESS DRILL WARRANTY 

 

30-DAY MONEY BACK GUARANTEE:

 

This PERFORMAX

®

 brand power tool carries our 30-Day Money Back 

Guarantee.

  

If you are not completely satisfied with your PERFORMAX

®

 brand 

power tool for any reason within thirty (30) days from the date of purchase, return 
the tool with your original receipt to any MENARDS® retail store, and we will 
provide you a refund 

– no questions asked. 

 

2-YEAR

 

LIMITED WARRANTY:  

 

This PERFORMAX

®

 brand power tool carries a 2-Year Limited Warranty to the 

original purchaser.  If, during normal use, this PERFORMAX

®

 power tool breaks 

or fails due to a defect in material or workmanship within two (2) years from the 
date of original purchase, simply bring this tool with the original sales receipt 
back to your nearest MENARDS® retail store.  At its discretion, PERFORMAX

®

 

agrees to have the tool or any defective part(s) repaired or replaced with the 
same or similar PERFORMAX

®

 product or part free of charge, within the stated 

warranty period, when returned by the original purchaser with original sales 
receipt.   Not withstanding the foregoing, this limited warranty does not cover any 
damage that has resulted from abuse or misuse of the Merchandise.  This 
warranty: (1) excludes expendable parts including but not limited to blades, 
brushes, belts, bits, light bulbs, and/or batteries; (2) shall be void if this tool is 
used for commercial and/or rental purposes; and (3) does not cover any losses, 
injuries to persons/property or costs.  This warranty does give you specific legal 
rights and you may have other rights, which vary from state to state.  Be careful, 
tools are dangerous if improperly used or maintained.  Seller’s employees are 
not qualified to advise you on the use of this Merchandise.  Any oral 
representation(s) made will not be binding on seller or its employees.  The rights 
under this limited warranty are to the original purchaser of the Merchandise and 
may not be transferred to any subsequent owner.  This limited warranty is in lieu 
of all warranties, expressed or implied including warranties or merchantability 
and fitness for a particular purpose.  Seller shall not be liable for any special, 
incidental, or consequential damages.  The sole exclusive remedy against the 
seller will be for the replacement of any defects as provided herein, as long as 
the seller is willing or able to replace this product or is willing to refund the 
purchase price as provided above.  For insurance purposes, seller is not allowed 
to demonstrate any of these power tools for you. 
 
For questions / comments, technical assistance or repair parts 

–  

Please Call Toll Free at:  1-866-349-8665 (M-F 8am 

– 6pm) 

 

SAVE YOUR RECEIPTS. THIS WARRANTY IS VOID WITHOUT THEM.

 

Distributed by: Menard, Inc., Eau Claire, WI 54703 

 

Summary of Contents for 241-0510





























Reviews: