14
CHECKING THE BATTERY CHARGE STATUS
– cont’d
3. Release the battery status button to
turn the LED’s OFF.
INSTALLING A BATTERY IN THE DRILL
1. Remove the discharged battery (1)
from the tool by pressing on the
battery release button (2) on the top of
the battery (Fig. 2).
2. Pull the battery out of the tool handle.
3.
Slide the fully charged battery into the
matching cavity in the tool handle
where the discharged battery has
been removed.
NOTE:
Make sure the two keys (3) in the
battery stem align with the matching key
ways (4) in the handle. The battery release
button will “click” into place when the
battery is fully installed
.
WARNING:
Do not immerse the
battery pack in water. Sudden cooling
could cause the hot battery to explode or
leak.
ADJUSTING THE TORQUE
Your drill is equipped with an adjustable
torque clutch for driving different types of
screws into different types of materials. It
also has a setting for “drilling”. The proper
setting depends upon the type of material
and size of screw being used and the
function required.
ASSEMBLY AND OPERATING
!
Fig. 2
1
2
3
4
