Performax 241-0505, Owner'S Manual

Page: 9 / 30

9
Hold power tool by insulated gripping
surfaces only, when performing an
operation where the cutting accessory
may contact hidden wiring or its own
cord.
Cutting accessory contacting a "live"
wire may make exposed metal parts of the
power tool "live" and shock the operator.
Position the cord clear of the spinning
accessory.
If you lose control, the cord
may be cut or snagged and your hand or
arm may be pulled into the spinning
accessory.
Never lay the power tool down until the
accessory has come to a complete
stop.
The spinning accessory may grab
the surface and pull the power tool out of
your control.
Do not run the power tool while
carrying it at your side.
Accidental
contact with the spinning accessory could
snag your clothing, pulling the accessory
into your body.
Regularly clean the power tool’s air
vents.
The motor’s fan will draw the dust
inside the housing and excessive
accumulation of powdered metal may
cause electrical hazards.
Do not operate the power tool near
flammable materials.
Sparks could ignite
these materials.
Do not use accessories that require
liquid coolants.
Using water or other
liquid coolants may result in electrocution
or shock.
SPECIFIC SAFETY RULES