11
Assembly and adjustments (continued)
Installation of Sanding Disc and Guard
1.
Peel backing away from sanding disc.
2.
Align perimeter of disc with plate, and press disc firmly into position on plate, leaving no
loose edges.
3.
Position disc guard against lower 1/3 of disc, aligning holes as shown. And use a
screwdriver to fasten the provided screws and washers securely.
Mount the disc sander table
1.
With the table in a horizontal position, line up and insert the pivot indexing pin with the pivot
hole on the frame. Hold in place.
2.
Insert the handle into the threaded hole and tighten.
