1) Use
SCROLL
button to select
I/M Readiness
from
Diagnostic Menu
and press
ENTER/EXIT
.
• If more than one module is detected, you will
be prompted to select a module before test.
• Use the
SCROLL
button to select a module,
and press
ENTER/EXIT
button.
2) Wait a few seconds while the code reader
validates the PID MAP.
3) If the vehicle supports both types of tests,
then both types shows on the screen for selection.
4) Use
SCROLL
button to view the status of the
MIL light (“
ON
” or “
OFF
”) and the following monitors:
•
Misfire monitor
- Misfire monitor
•
Fuel System Mon
- Fuel System Monitor
•
Comp. Component
- Comprehensive Components Monitor
•
EGR
- EGR System Monitor
•
Oxygen Sens Mon
- O2 Sensors Monitor
•
Catalyst Mon
- Catalyst Monitor
•
EVAP System Mon
- Evaporative System Monitor
•
Oxygen Sens htr
- O2 Sensor Heater Monitor
•
Sec Air System
- Secondary Air Monitor
•
Htd Catalyst
- Heated Catalyst Monitor
•
A/C Refrig Mon
- A/C system Monitor
5) If the vehicle supports readiness test of
“
This Drive Cycle
”, a screen of the following
will be displayed:
• The number in the upper right corner of the
screen indicates total number of screens the
retrieved data cover and sequence of currently
displayed data.
6) Press
ENTER/EXIT
button to return to previous menu.
Viewing Vehicle Information
The Vehicle Info. function enables retrieval of the Vehicle Identification No. (VIN),
Calibration ID(s), Calibration Verification Nos. (CVNs) and In-use Performance
Tracking on 2000 and newer vehicles that support Mode 9.
============================4/6
1) Read Codes
2) Erase Codes
3) View Freeze Frame
u
4) I/M Readiness
Diagnostic Menu
============================1/3
u
Engine
Module $A4
Exit
Control Module
==============================
Reading PID...
- Please Wait -
I/M Readiness
============================1/3
u
Since DTCs Cleared
This Drive Cycle
Exit
I/M Readiness
============================1/3
MIL Status
OFF
Misfire Monitor
OK
Fuel System Mon
OK
Comp. Component
OK
Since DTCs Cleared
============================1/3
MIL Status
ON
Misfire Monitor
OK
Fuel System Mon
OK
Comp. Component
OK
This Drive Cycle
1 4
