1 2
• The control module number, sequence of the DTCs, total number of codes
detected and type of codes (Generic or Manufacturer specific, Stored or Pending
codes) will be observed on the upper right hand corner of the display.
3) If more than one DTC is found, use
SCROLL
button, as necessary, until all the
codes have been shown up.
• If no codes are detected, a “
No codes are stored in the module!
” message displays on
the screen.
• If retrieved DTCs contain any manufacturer specific or enhanced codes, the
display indicates “
Manufacturer Control
”.
4) Press ENTER/EXIT button to return
to previous menu.
Erasing Codes
CAUTION: Erasing the Diagnostic Trouble Codes may allow the code reader to delete not only the
codes from the vehicle’s on-board computer, but also “Freeze Frame” data and manufacturer
enhanced data. Further, the I/M Readiness Monitor Status for all vehicle monitors is reset to Not
Ready or Not Complete status. Do not erase the codes before the system has been checked
completely by a technician.
• This function is performed with key on engine off (KOEO). Do not start the engine.
1) If you decide to erase the DTCs, use
SCROLL
button to select
Erase Codes
from
Diagnostics Menu
and press
ENTER/EXIT
button.
2) A warning message comes up asking for
your confirmation.
3) If you want to proceed with erasing the codes,
press
ENTER/EXIT
button to erase.
• If the codes are cleared successfully, an
“
Erase Done!
” message shows up.
• If the codes are not cleared, then an
“
Erase Failure. Turn Key on with Engine off!
” message displays.
4) Wait a few seconds or press any key to return to
Diagnostic Menu
.
• If you do wish to proceed to erase the codes, then press
SCROLL
button to select
NO
and press
ENTER/EXIT
. A “
Command Canceled
” message shows up. Press any key
or wait a few seconds to return to
Diagnostic Menu
.
$09 4/6
P0115
Other
==============================
Manufacturer control
============================2/6
1) Read Codes
u
2) Erase Codes
3) View Freeze Frame
4) I/M Readiness
Diagnostic Menu
==============================
Erase trouble codes!
Are you sure?
YES
NO
Erase Codes
