1. DO NOT exceed rated capacities at specified
heights. Overloading can cause damage to or
failure of the jack.
2. DO NOT use if jack cannot extend at least 6
in. before lifting the load.
3. Use only on hard, level surface capable of
sustaining the load. Use of jack on other than
hard level surfaces can result in jack instabil-
ity and possible loss of load.
4. Emergency lifting device only. Use for tempo-
rary tire changing or chain mounting only. Do
not lift load for an extended period of time.
5. Do not move or dolly the load while on the
jack. Ensure that no personnel pass under-
neath load until load is securely supported by
jack stands. Be sure all personnel are clear of
load before lowering load.
6. If load is pushed off jack, discard jack. Do not
reuse.
7. Wear ANSI approved safety goggles and
heavy duty work gloves during use.
8. Keep clear of load while lifting and lowering.
9. Lower load slowly.
10. DO NOT use for aircraft purposes.
11. Apply parking brake and chock tires before
lifting vehicle.
12. Lift vehicle only at vehicle manufacturer
recommended lift locations.
13. Do not alter this product in any way.
14. Inspect before every use; do not use if parts
are loose or damaged.
15. Keep your work area clean and well lit. Clut-
tered work areas invite accidents.
16. Keep bystanders, children, and visitors away
while operating jack. Distractions can cause
you to lose control.
17. Stay alert. Watch what you are doing, and
use common sense when operating a jack.
Do not use a jack while tired or under the
influence of drugs, alcohol or medication. A
moment of inattention while operating jacks
may result in serious personal injury.
18. Store idle jacks out of reach of children and
other untrained persons. Jacks are danger-
ous in the hands of untrained users.
19. Jack service must be performed only by
qualified repair personnel. Service or main-
tenance performed by unqualified personnel
could result in a risk of injury.
20. When servicing a jack, use only identi-
cal replacement parts - refer to attached,
product-specific parts list and diagram. Fol-
low instructions in the Care & Maintenance
section of this manual. Use of unauthorized
parts or failure to follow maintenance instruc-
tions may create a risk of injury and may void
any applicable warranty.
21. Maintain labels and nameplates on the jack.
These carry important information. If unread-
able or missing, contact Performance Tool for
a replacement.
22. Before use, read manufacturer’s instruction
manual for the vehicle (or object) you will lift.
23. Do not work under the vehicle without prop-
erly supporting the vehicle with jack stands.
24. Avoid dangerous oncoming traffic. Use
the Jack as far away from the roadside as
possible.
25. Do not allow anyone inside the vehicle while
using the Jack. Keep all bystanders a safe
distance away from the vehicle.
26. Do not support both ends of the vehicle at the
same time.
27. Before lowering the jack, remove all tools and
equipment from under the vehicle.
28. The warnings, precautions and instructions
discussed in this manual cannot cover all
possible conditions and situations that may
occur. The operator must understand that
common sense and caution are factors,
which cannot be built into this product, but
must be supplied by the operator.
WARNING:
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS
TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND
WILL VOID WARRANTY.
WARNING: This is a lifting device only. Use only for emergency tire changing or tire chain mounting only.
IMPORTANT SAFETY INFORMATION
3
