6
3111435 | ED. 01 | 01 - 2021
DIMMING INSTRUCTION
DA1
INPUT
DA2
DA2 and push dimming input terminal
DA1 and push dimming input terminal
0-10V
OUTPUT
+12V
12v power supply input te
The earth wire
0-10V signal output te
GND
Descriptional of terminals
- Pressing the button for less than 0.05 second will not trigger any response.
- The minimum dimming depth of push dimming is 10%.
- The push dimming mode has power-failure memory function. Re-power on the driver and the light will recover to the state before power failure.
- In push dimming mode, the dimming direction of each pressing is the opposite of the previous direction.
OPERATION
LASTING TIME
FUNCTION
0.1 - 0.5 S
0.6 - 5 S
>9 S
LED light on / off
Dim up / down
Reset to 50% luminance of push setting
SHORT PRESS
LONG PRESS
RESET PRESS
Instruction of Push Dimming
Wiring diagram of Push Dimming
LED +
AC-L
AC-N
DA1 / PUSH
DA2 / PUSH
AC input
push switch
12VDC input
LED -
0-10V dimmable
LED driver
LF-SCD010B
DIM +
0-10V
+12V
GND
DIM -
Wiring diagram of DALI Dimming
LED +
AC-L
AC-N
DA1 / PUSH
DA2 / PUSH
AC input
DALI input
12VDC input
LED -
0-10V dimmable
LED driver
LF-SCD010B
DIM +
0-10V
+12V
GND
DIM -
