Footrest Operation
1.
To adjust the footplate to the required height, loosen the height adjustment screw from the clamp with the Allen key provided. Adjust
the footplate to the required height and refit the screw and tighten until secure
(see Fig.5).
2.
To adjust the footplate angle to the required position, loosen the screw located at the side of the footplate and adjust to the required
angle. Tighten the screw until secure
(see Fig.6).
4.
ATTENDANT
- Insert the castor stem into the underside of the frame and insert the e-clips at the desired height for the user.
(see Fig.3)
.
PLEASE NOTE
there are only three different height settings, do not set the castors to the highest setting which is indicated
with a cross below. For further information see ‘height adjustment operation’
(see Fig.14c)
5.
SELF-PROPELLED
- Insert the castor stem into the underside of the frame and insert the e-clips
(see Fig.3)
.
For the 24˝ rear wheels, insert the 4.5˝ bolts through the wheel and the axle bracket at the rear of the chair and apply the nut.
Tighten the bolt until the wheel is secure. Place wheel cap over the end of the bolt for protection
(see Fig.4).
ENSURE THAT ALL CASTORS AND WHEELS ARE POSITIONED AT THE SAME HEIGHT AND LEVEL
ON THE GROUND.
(Fig. 3)
(Fig. 3a)
(Fig. 4)
(Fig. 5)
(Fig. 6)
ENSURE THAT
THE E-CLIP IS
INSERTED FULLY.
71247 Is2_Deluxe Shower Commode User Guide.indd 4
02/06/2017 14:24
