OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
There is a
Damper (42)
built into the
Right Fan Shroud (43).
Move the Indicator in the
Damper (42)
to point to the numbers on
the
Right Fan Shroud (43)
to adjust the load. There are settings
from 1 to 9. Setting #1 will provide the lowest resistance. Setting
#9 will provide the highest resistance.
HANDLEBAR POSITION
The
Handlebar (3)
can be placed on the hook in the
Console Monitor Post (6),
refer to illustration A.
Or, you can place the
Handlebar (3)
on the
Handlebar Holder (52)
as shown in illustration B.
PEDAL CAP ADJUSTMENT
The position of the
Foot Pedal (45)
can be adjusted. Refer to
the illustration. Pull the
Foot Pedal (45)
out from the two bulges
in the
Pedal Support Plate (5),
then lower or raise the
Foot Pedal (45)
to the desired position. Lock the
Foot Pedal
(45)
in position by pressing the adjustment holes of the desired
position onto the two bulges.
Refer to the numbers on the
Foot Pedal (45)
to make sure that
Foot Pedal (45)
are adjusted on the same position on both
sides.
16