background image

Phone: 218.828.3700

www.nexlight.com 

Fax: 218.824.1568

© 2015 NexLight Lighting Controls, All Rights Reserved. 

4

Element Orientation 

Detection Area 

Description

8 Element IR of

PerfectSense

PS-HDTC24-R

864 optical view patterns,

each cluster of 8-element

pattern makes detecting

very fine body movement

possible.

360-degree coverage with

circular area, good

repeatability.

Detect movements 20

degree across the optical

zone.

4 Element IR of

Ordinary Product

224 optical view patterns.

Detection coverage is not

full circle.

Many blind spots.

2 Element IR of

Ordinary Product

(Industry Standard)

62 optical view patterns.

An ellipse shape detection

coverage, not full circle.

Detect movement 40

degree across optical

zone.

Sensor Technology Comparison

HDIR technology significantly surpasses known boundaries of IR sensor technology. Extending the capability of IR to new
levels of accuracy through a combination of patented sensor hardware and logic algorithms.  The power behind this innova-
tion originates from a proprietary 8-element pyros infrared element that eclipses current competitive sensor logic technolo-
gies. Eight-Hundred and Sixty-Four (864) optical view patterns are achieved, delivering unmatched sensitivity for minor
motion events like hand and finger movements. Paired with ultrasonic technology for a complete solution designed to meet
the demands of Title 24 and ASHRAE 90.1.

Summary of Contents for PS-PCL24-R








Reviews: