25
Listening to music via Bluetooth streaming
Playing audio files in Bluetooth mode
When you have successfully connected your radio with the chosen Bluetooth source device you can
start to play your music using the controls on your connected Bluetooth device.
Once playing has started adjust the volume to the required setting using the Volume control on
your radio or on your enabled Bluetooth source device.
Use the controls on your Bluetooth source device to play / pause and navigate tracks. Alternatively,
control the playback using Play / Pause (
), Next track (
) , Previous track
buttons (
) on your radio.
Press and hold the Fast-forward / Rewind button to move through the current track. Release the
button when the desired point is reached.
Not all player applications or devices may respond to all of these controls.
NOTE
1.
2.
3.
Reconnecting a previously paired Bluetooth source device
The UBOX 500R can memorize up to 8 sets of paired Bluetooth source devices, when the memory
exceed this amount, the earliest paring device will be over written from the device.
If your Bluetooth source device already paired with the UBOX 500R previously, the unit will memorize
your Bluetooth source device and it attempts to reconnect with a Bluetooth source device in memory
which is last connected. If the last connected Bluetooth source device is not available, the UBOX 500R
will try to connect to the second last Bluetooth source device.
Alternatively, you can select to connect to your previously-paired device.
Press the Source button as needed to select Bluetooth mode.
Press Bluetooth pairing button to enter the “Paired Device List” menu.
Rotate the Tuning control knob to select a previously-paired device you would like to connect and
press the Tuning control knob to confirm the selection.
Disconnecting your Bluetooth device
Press and hold the Bluetooth pairing button for 2-3 seconds to disconnect with your Bluetooth
device or turn off Bluetooth on your Bluetooth source device to disable the connection. There will
be a confirmation tone sound and the “Bluetooth Pairing” will show on the display. The Bluetooth
status indicator (
) on the radio will flash a fast blue to show the radio is discoverable again for
pairing.
You can also press the Source button to select any mode other than Bluetooth mode to disable the
connection.
1.
1.
2.
2.
3.
