Rotate the
Tuning/Seek/Select control
until '
Equaliser
' is highlighted on the display.
Press the
control
.
Rotate the
Tuning/Seek/Select control
to cycle through and highlight the various
modes. Press the
control
to confirm your selection.
a - 'Normal (Flat)'
d - 'Movie'
g - 'News'
b - 'Jazz'
e - 'Classic'
h – 'My EQ'
c - 'Rock'
f - 'Pop'
Note
: The EQ settings have no effect on the sound when using a headphone to listen to
the Perfectpro Audisse.
SETTING THE ALARM CLOCK
Perfectpro Audisse has two separate alarms which can be set to wake you to either the
radio or a buzzer alarm. In the event of a power interruption Perfectpro Audisse has built
in memory that will retain your alarm settings.
Important note: In Standby mode the alarm function can only be used when the radio
is operated on AC power. In Standby mode on battery power the radio will turn off fully
after 30 seconds (battery power save mode) and will not be turned on by the alarm
function/settings.
Ensure that the time is set correctly before setting the alarms.
With Perfectpro Audisse switched on, press the
Menu button
to access the menu for the
current mode. Rotate the
Tuning/Seek/Select control
until 'Main menu' is highlighted
on the display. Press the
control
to enter the 'Main menu'.
Rotate the
Tuning/Seek/Select control
until 'Alarms' is selected on the display. Press
the
control
to see the current alarm settings. If no change is required, press the
Menu
or
Back buttons
to exit.
Rotate the
Tuning/Seek/Select control
until the desired alarm (1 or 2) is highlighted on
the display. Press the
control
to enter alarm setup.
Rotate the
Tuning/Seek/Select control
until 'Time' is highlighted on the display. Press
the
control
to adjust the alarm time.
Rotate the
Tuning/Seek/Select control
to choose the alarm hour. Press the
control
to
confirm the setting.
Rotate the
Tuning/Seek/Select control
to choose the alarm minute. Press the
control
to confirm the setting. The display will then return to the alarm setting menu. If the sound
system has been set to use a 12 hour clock format, there will also be an option here for
setting AM or PM for the alarm time.
GB
31
32