7
MANUAL TUNING
. Press the Power button to turn on the radio.
2. Be sure to screw in the rubber FM antenna properly to get best reception.
3. Rotate the Tuning Control knob will change the frequency in 50 kHz increments.
4. Rotate the Volume Control knob to get required sound level.
5. To turn off the radio, press the Power button. Display will show OFF.
PRESET STATIONS
Storing the stations in preset memories, please follow below steps. There are 5 memory presets in this
radio.
. Press the Power button to turn on the radio.
2. Rotate Tuning Control knob to tune to required station.
3. Press and hold down the required preset until radio beeps. The preset number will appear in the display
and the station will be stored under chosen preset button.
4. Repeat this procedure for the remaining presets.
5. Stations stored in preset memories can be overwritten by following above procedures.
RECALL STATIONS FROM PRESET MEMORIES
. Press the Power button to turn on the radio.
2. Momentarily press the required Preset button, the preset number and station frequency will appear in
the display.
DISPLAY MODES
Your radio has six display modes for FM radio. These use data provided by broadcasters which is
commonly known as RDS.
The Radio Data System (RDS) is a system in which inaudible digital information is transmitted in
addition to the normal FM radio programme.
RDS offers several useful features. The following are available on your radio:
. Press the Info button to cycle through the various modes.
a. Frequency
Displays the frequency of the station being listened to.
b. Station name
Displays the name of the station being listened to.
c. Programme Type
Displays the type of station being listened to e.g. Pop, Classic, News, etc.
d. Radio text
Displays radio text message such as, new item etc.
e. Signal strength
Displays a graph showing the signal strength for the station being received.
f . Time
Displays the current time.
Note:
If there is no RDS data available (or if the signal is too weak), all display option will revert back to the
frequency display after 0 seconds. If RDS information of station name is available, on the other hand,
all display option will return to the station name display.
