9
FACTORY RESET
If you wish to completely reset your radio to its initial state this may be performed by following this
procedure. By performing a factory reset, all user entered settings will be erased.
. Press and hold the Menu button to enter the setting.
2. Rotate the Tuning control until ‘FACTORY’ shows on the display. Press the Tuning control to enter the
setting menu.
3. Rotate the Tuning control until “RESET” shows on the display. Press the Tuning control to enter the
setting menu.
4. Rotate the Tuning control to select ‘YES’ and press the Tuning control to confirm the setting. A full
reset will be performed. Presets will be erased. All the setting will be set to their default values.
If you do not wish to carry out a system reset, select 'NO' and then press the Tuning control. The display
will revert back to the previous display.
In case of malfunction due to electrostatic discharge, reset the product using the above procedure. In
some circumstances it may be necessary to disconnect and then reconnect the mains power in order to
resume normal operation.
SOFTWARE VERSION
The software display cannot be altered and is just for your reference.
. Press and hold the Menu button to enter the setting
2. Rotate the Tuning control until “FACTORY” shows on the display. Press the Tuning control to enter the
setting menu.
3. Rotate the Tuning control until 'VER X' (e.g. VER 02) appears. Current software version is shown on
the display.
4. Press and release the Menu button to exit the software version display.
