Perfect Prime TC0376, Instruction Manual

Page: 16 / 27

Users can transfer data from the built-in memory on the instrument to a
PC through SE376 software. The communication requires a USB or RS-232
serial connection.
TESTLINK SE376 SOFTWARE
1. THE SE376 PACKAGE CONTAINS:
• 80mm CD
• Custom designed USB cable for SE376
2. SYSTEM REQUIRED:
Windows NT 4.0/ NT2000/ XP/ VISTA/ Windows 7
3. MINIMUM HARDWARE REQUIRED:
•
PC or NoteBook with Pentium 800MHz or higher, 128 MB RAM
•
At least 50 MB hard disk space available to install SE376
•
Recommended screen resolution 1024X768 or above
4. INSTALL SE376 AND USB120 CONNECTOR DRIVER:
1. We recommend close all other application before installing SE376.
2. Insert setup CD disk to CD disk drive to display install screen. You
may also run MainSetup.exe in the directory of the CD.
3. Click Install to begin installation.
4. It will install USB-120 connector driver first:
5. While installing, it will show this window below, just click “next” to
continue. (see Fig.1)
10. COMMUNICATION WITH A PC
P.15