When memory is full, REC appears and blinks on the display and logging
stops. You can clear memory in next power on the meter to enter clear
memory mode. Press and hold button and then power on the meter
to enter clear memory mode to delete logged readings from memory.
The display shows the number from 5 decreases to 0.
Below table diagram shows each button function
when user enter into calibration mode.
NOTE:
Turn the Power “OFF” before attempting
following SETUP.
Setup mode is canceled during below
procedure if “POWER” button is pressed.
TEMPERATURE METER CALIBRATION SETUP
CLEARING MEMORY
9.1 TEMPERATURE CALIBRATION
Place the temperature probe in a known, stable temperature
environment. Allow the readings to stabilize. In Setup change the
offset until the display reading matches the calibration temperature.
8. CLEARING MEMORY
9. TEMPERATURE METER CALIBRATION
SETUP
P.13