4
Safety precaution and consideration
Electronic sensors and microprocessors used in the product are
sensitive instruments. Therefore:
--> the product must be kept away from water, fire, inflammable oil
and gas or sites with strong electromagnetic interference.
Do not dismantle and remodel the product without authorization.
Please use damp cloth or weak soap to clean
the enclosure of the device; do not use
abradant, isopropanol or solvent to clean.
Battery
Slide open the battery cover at the back, Insert
a 9V battery and close up the cover
Measurement
Press the
“Power”
button to turn on
Press the
“Light / ZERO”
button to turn on the
backlight LED for convenience
Press the
“Light/ZERO”
button for 3 seconds
to reset the meter to initial zero reading
Place the detector about 2 inches from the
source, the detector will detect microwave
energy and display the result on the LCD
If the detected level is high then the warning
level, red LED will flash and beeper will ring out
