24
WARNING
When lighting, keep your face and hands as far
away from the grill as possible.
CAUTION
When using a match to light the grill make sure to
use the attached lighting rod.
To Match Light the Grill
If the burner will not light after several attempts using the control knobs, the burner may be lit with a match.
Main Burner
1. If you have already attempted to light the main burner with the
igniter, allow 5 minutes for any accumulated gas to dissipate.
2. Insert a match into the lighting rod (28-1) as shown in fig. 28. Ignite
the match and insert through the cooking grids (28-2) to the burner.
3. Press the control knob and rotate left to the
“
HI
”
setting, continue to
press the knob until the burner ignites. The burner should light
immediately.
4. If the burner does not light within 4 seconds turn the knob to the
“
OFF
”
position, wait 5 minutes and try again.
Sear Burner
1. If you have already attempted to light the sear burner with the
igniter, allow 5 minutes for any accumulated gas to dissipate.
2. Insert a match into the lighting rod (29-1) as shown in fig. 29. Ignite
the match and insert through the cooking grids (29-2) to the burner.
3. Press the control knob and rotate left to the
“
HI
”
setting, continue to
press the knob until the burner ignites. The burner should light
immediately.
4. If the burner does not light within 4 seconds turn the knob to the
“
OFF
”
position, wait 5 minutes and try again.
Rotisserie Burner
1. If you have already attempted to light the rear rotisserie burner with
the igniter, allow 5 minutes for any accumulated gas to dissipate.
2. Insert a match into the lighting rod (30-1) as shown in fig. 30. Ignite
the match and hold next to the burner (30-2).
3. Press the control knob and rotate left to the
“
HI
”
setting, continue to
press the knob until the burner ignites. The burner should light
immediately.
4. If the burner does not light within 4 seconds turn the knob to the
“
OFF
”
position, wait 5 minutes and try again.
Side Burner
1. If you have already attempted to light the side burner with the
igniter, allow 5 minutes for any accumulated gas to dissipate.
2. Insert a match into the lighting rod (31-1) as shown in fig. 30. Ignite
the match and insert through the cooking grids (31-2) to the burner.
3. Press the control knob and rotate left to the
“
HI
”
setting, continue to
press the knob until the burner ignites. The burner should light
immediately.
4. If the burner does not light within 4 seconds turn the knob to the
“
OFF
”
position, wait 5 minutes and try again
Fig. 28
Fig. 29
Fig. 31
(28-2)
(28-1)
(29-2)
(29-1)
Fig. 30
(30-2)
(30-1)
(31-2)
(31-1)
CAUTION
Remove the warming rack when
using a match to light the rotisserie burner.
文件使用
"pdfFactory Pro"
试用版本创建
www.fineprint.cn