11
AIR CONDITIONER FEATURES
Thoroughly familiarize yourself with the control panel as shown below and all of its functions. Afterwards, follow the
symbol for the functions you desire. This unit can be controlled by the unit control or the remote control.
NOTE:
This manual does not include Remote Control Operations; See the Remote Control Instructions packed with the
unit for details.
1. POWER button
Power switch ON/OFF.
2. MODE select button
Selects the appropriate operating mode. Each time you
press the button, a mode is selected in a sequence
that goes from AUTO, COOL, DRY, and FAN. The mode
indicator light illuminates next to the different mode
settings. NOTE: On DRY mode, you can adjust the
humidity for models with humidity sensor only.
3. SLEEP (ECO)/FILTER button
Used to initiate the SLEEP/ECO operation.
NOTE: After 250 hours of operation, the filter indicator
light illuminates. This feature is a reminder to clean the
Air Filter for more efficient operation. Press this button
for 3 seconds to cancel the reminder.
4. UP (+) and DOWN (—) buttons
Used to adjust (increase/decrease) temperature settings
(1°F/1°C increments) in a range of 62°F (17°C) to 86°F
(30°C) or to set the TIMER setting in a range of 0 – 24
hours or the humidity settings in a range of 35% RH
(Relative Humidity) to 85% RH in 5% increments (only
for models with humidity sensor).
NOTE:
The control is capable of displaying the
temperature in degrees Fahrenheit or degrees Celsius.
To convert from one to the other, press and hold the Up
and Down buttons at the same time for 3 seconds.
5. TIMER button
Used to initiate the AUTO ON start time and AUTO OFF
stop time program, in conjunction with the (+) and (—)
buttons. The timer ON/OFF indicator light illuminates
next to the timer ON/OFF settings.
6. FAN button
Control the fan speed. Press to select one of three fan
speeds: LOW, HI or AUTO. The fan speed indicator light
illuminates under different fan settings except AUTO
speed. When AUTO fan speed is selected all of the fan
indicator lights go dark.
NOTE: Press this button for 3 seconds to initiate ION
feature. The ion generator is energized and will help to
remove pollen and impurities from the air, trapping
them in the filter. Press it for 3 seconds again to stop
the ION feature.
7. SWING button
Used to initiate the Auto Swing feature. When the
operation is ON, press the SWING button to stop the
louver at a desired angle.
INDICATOR LIGHTS
Timer ON light
Degrees Celsius
Timer OFF light
Degrees Fahrenheit
Dry mode light
Humidity (on some
models only)
Auto mode light
Low fan speed light
Fan mode light
High fan speed light
Cool mode light
Filter light
Follow Me light
Sleep mode light
FIG. 28
