4
OPERATING INSTRUCTIONS
SETTING UP YOUR HUMIDIFIER
1. Remove from box. Remove packaging material. Set aside
instruction manual. Recycle packaging materials or save for
storage.
2. Remove twist tie from power cord and extend power cord full
length. DO NOT OPERATE WITH POWER CORD COILED
OR TWIST TIE IN PLACE.
3. Ensure proper assembly. Make sure mist chimney and water
tray are securely in place. (Fig. 1)
4. Additionally, make sure blue latch is engaged. (Fig. 2)
5. Select a firm, level location at least 12 in. from any walls.
Place the humidifier on a water-resistant surface. Steam
should be directed away from any walls, bedding or furniture.
Perfect Aire will not accept responsibility for property
damage caused by water spillage.
WARNING: KEEP OUT OF REACH OF CHILDREN.
This product produces HOT STEAM and should be placed in an area not accessible to
children or pets, ensuring that the power cord is securely out of reach.
FILLING/REFILLING YOUR HUMIDIFIER
NOTE:
When moving or lifting the tank, use one hand on the
tank handle and the other on the bottom of the tank.
1. Remove tank by grasping handle and gently pulling up.
Remove tank cap located on bottom of tank by turning the cap
counter-clockwise.
2. Fill the tank with water (never warm/hot water).
NOTE: Distilled water is recommended (but not required) to
reduce mineral deposits.
3. Replace the tank cap by turning it clockwise to screw it back in place on the tank. See Fig. 3.
Take care not to over-tighten.
Place the tank back onto the humidifier base.
RESET:
1. When your humidifier is out of water the refill light will
illuminate. See Fig. 4.
2. Turn the humidifier off, wait 20–30 minutes, refill the tank, and
turn the humidifier back on.
Fig. 3
Fig. 4
Fig. 1
Fig. 2
Cloc
kwise to Tighten
Summary of Contents for PAWM1
Page 1: ......
Page 2: ...INSIDE FRONT COVER BLANK ...
