4
BEFORE YOU BEGIN
Read these instructions completely and carefully.
IMPORTANT
- Save these instructions.
IMPORTANT
- Observe all governing codes and
ordinances.
Note to Installer
- Be sure to leave these instructions with
the Consumer.
Note to Consumer
- Keep these instructions for future
reference.
Skill level
- Installation of this appliance requires basic
mechanical skills.
Completion time
- Approximately 1 hour.
We recommend that two people install this product.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not
covered under the Warranty.
You MUST use all supplied parts and use proper
installation procedures as described in these
instructions when installing this air conditioner.
WINDOW REQUIREMENTS
Your air conditioner is designed to install in standard
double hung windows with opening widths of 23 to 36
inches (584 mm to 914 mm).
NOTE:
H = vertical opening. See table below.
TABLE 1:
Model
5000~8000 Btu/h
10000~12000 Btu/h
Size (H) 14″ (356 mm)
15½″ (394 mm)
CAUTION
Do not, under any circumstances, cut or remove the
third (ground) prong from the power cord.
Do not change the plug on the power cord of the air
conditioner.
Aluminum house wiring may present special problems-
consult a qualified electrician.
When handling unit, be careful to avoid cuts from sharp
metal edges and aluminum fins on front and rear coils.
TOOLS YOU WILL NEED
Phillips
Screwdriver
Level
TOOLS YOU MAY NEED
Screwdriver
Pencil
Ruler or Tape
Measure
Scissors or
Knife
NOTE: Save carton and these Installation Instructions for
future reference. The carton is the best way to store unit
during winter or when not in use.
INSTALLATION INSTRUCTIONS
INNER
OFFSET
WOODEN WINDOWS
23–36 in.
584–914 mm
H
EXTERIOR
WALL
INNER
WINDOW
SILL
INTERIOR
WALL
