10
INSTALLATION INSTRUCTIONS
Read these instructions completely
and carefully.
IMPORTANT
- Save these instructions.
IMPORTANT
- Observe all
governing codes and ordinances.
Note to Consumer-
Keep these
instructions for future reference.
Note to Installer-
Be sure to leave these
instructions with the Consumer.
Completion time- Approximately 1 hour.
Skill level- Installation of this appliance
requires basic mechanical skills.
We recommend that two people install
this product.
Proper installation is the responsibility
of the installer.
Product failure due to improper installation
is not covered under the Warranty.
You MUST use all supplied parts and use
proper installation procedures as described
in these instructions when installing this air
conditioner.
BEFORE YOU BEGIN
Do not, under any circumstances, cut or
remove the third (ground) prong from the
power cord.
CAUTION
Do not change the plug on the power cord
of the air conditioner.
Aluminum house wiring may present special
problems- consult a qualified electrician.
When handling unit, be careful to avoid cuts from
sharp metal edges and aluminum fins on front and
rear coils.
TOOLS YOU WILL NEED
Phillips
Screwdriver
Level
TOOLS YOU MAY USE
Screwdriver
Pencil
Ruler or tape measure
Scissors or knife
NOTE: Save carton and these Installation Instructions for future reference.
The carton is the best way to store unit during winter or when not in use.
WINDOW REQUIREMENTS
Your air conditioner is designed to install in
standard double hung windows with opening
widths of 23 to 36 inches (584 mm to 914 mm).
NOTE:
H = vertical opening. See Table 1 on next page.
INNER
Wooden Windows
OFFSET
H
INTERIOR
WALL
EXTERIOR
WALL
INNER
WINDOW
SILL
