Installation and Operation Manual for
Perenio®
Joule Eco Smart Heater
Document version: 1.1.0
©Perenio IoT spol s r.o. All rights reserved
Page
22
of
55
2.1.3 Wall Installation (Option 2)
Figure 6
–
Mounting on brackets (Wall)
1.
Arrange the device on a clean, horizontal surface with the heat-radiant panel
facing downwards and tighten the mounting brackets to the back of the panel
(Skip this step, if mounting brackets were pre-installed by the manufacturer).
2.
Choose the Eco Smart Heater orientation on the wall (Horizontal or vertical
installation).
3.
Drill 4 holes in the wall considering the distance between the cross-shaped
mounting holes on the brackets.
Figure 7
–
Spacing for drilling holes (Wall mounting)
4.
Insert the dowels in the drilled holes and screw in the screws supplied.
335 mm
2
3
5
m
m
Summary of Contents for Joule Eco Smart Heater
Page 2: ......