PCS18501
PEREL
8
•
Leer eerst de functies van het toestel kennen voor u het gaat gebruiken. Ongeschoolde personen mogen dit
toestel niet gebruiken. Meestal is beschadiging het gevolg van onprofessioneel gebruik.
•
Gebruikt u een verlengkabel, zorg dan dat de draden minstens 1mm² zijn. Haal de verlengkabel van de haspel.
•
Gebruik het toestel enkel waarvoor het gemaakt is. Bij onoordeelkundig gebruik vervalt de garantie.
•
Zorg er altijd voor dat u stabiel staat wanneer u de
PCS18501
gaat gebruiken.
•
Zorg ervoor dat u geen water-, elektriciteits- of gasleidingen raakt wanneer u boort.
•
Gebruik uw
PCS18501
niet in de buurt van ontvlambare dampen en brandbare materialen.
•
Trillingen kunnen het arm-hand-systeem beschadigen. Beperk de blootstelling aan trillingen zoveel mogelijk.
•
Ga na of het voltage vermeld op het toestel overeenkomt en het voltage van de netspanning.
3. Bijzondere veiligheidsvoorschriften
•
Gebruik enkel zaagbladen in een perfecte staat. Vermijd het gebruik van gebogen, vervormde of beschadigde
bladen.
•
Blokeer nooit het zaagblad.
•
Gebruik geen HSS stalen zaagbladen.
•
Verwijder alle spijkers en andere metalen uit het werkstuk voor u begint te zagen.
•
Begin te zagen nadat het zaagblad op volle toeren draait.
4. Beschrijving (zie figuur A & B)
1. Stofzuigaansluiting
6. AAN/UIT schakelaar
2. Schaalaanduiding voor verstekhoek
7. Schaalaanduiding voor zaagdiepte
3. Instelknop voor verstekhoek
8. Instelknop voor verstekhoek
4. Schoen
9. Instelknop voor zaagdiepte
5. Ontgrendelknop
10. Ventilatieopeningen
5. Bediening
BELANGRIJK
: Zagen vereist slechts geringe druk door de gebruiker. Te veel druk zal de motor onnodig belasten en
de snelheid van het zaagblad verminderen.
a.
De parallel-langsgeleider monteren (fig. C)
De parallel-langsgeleider wordt gebruikt om in een rechte lijn, parallel met de rand, te kunnen zagen met een
maximale afstand van 10cm.
•
Maak de schroef (2) los.
•
Steek de parallel-langsgeleider (3) in de schoen (1) en regel de afstand.
•
Span de schroef aan.
b. Verwijderen en aanbrengen van een zaagblad (fig. E)
OPGELET:
Koppel het toestel los van het net. Zorg ervoor dat het zaagblad volledig stilstaat voor u het vervangt.
Gebruik geen bladen dikker dan het spouwmes of met tanden dunner dan het spouwmes.
•
Houd de flens (7) vast met de steeksleutel.
•
Maak de schroef los met de sleutel (7). Verwijder deze.
•
Verwijder de flens.
•
Houd de zaagbladbescherming (4) zoals in de figuur.
•
Verwijder het oude blad en vervang hem door een nieuwe. Zorg ervoor dat de pijl op het zaagblad in dezelfde
richting wijst als de pijl op de machine.
•
Plaats de zaagbladbescherming terug in de originele positie.
•
Plaats de flens op het blad en span de schroef aan.
•
Regel het spouwmes.
Summary of Contents for PCS18501
Page 2: ...PCS18501 PEREL 2 ...