GWT
2
PEREL
4. Battery Installation
•
Remove the cover of the battery compartment by loosening the plastic screw at the bottom of the timer.
•
Install 4 x AA alkaline batteries respecting the polarity.
•
An
icon appears on the LCD display when the batteries are low and should be replaced.
5. Detachable Electronics
The electronics of your
GWT
can be removed from the valve section for ease in programming. To do so, press the
black buttons located on each side of the timer and remove the body. When programming is complete, simply slide
the timer body back over the valve section until both buttons snap into place.
NOTE
: When the body is detached, the valve remains closed.
6. Quick Start Program
1.
TIME
: Press
PGM
once and then press
HR
,
MIN
and
DAY
to enter the current time.
2.
START
: Press
PGM
again and then
HR
,
MIN
to enter watering start time.
3.
DAYS
: Press
DAY
to move the first desired weekday. Press
ON/OFF
when the desired day is flashing. Press
DAY
again to move to the next desired day and press
ON/OFF
again. Repeat when desired.
4.
DURATION
: Press
PGM
again and then
HR
and
MIN
to set the duration of the watering cycle.
5.
ADDITIONAL PROGRAMS
: Repeat steps 2 to 4 and press
PGM
to move to each program number.
6.
When finished, press the
PGM
button repeatedly until
PGM ON
and
TIME
appear on the display.
NOTE
: For more detailed information, refer to “
Use
”.
7. Use
Normal Mode
In Normal Mode, the clock is running, indicated by the flashing
colon on the display.
PGM ON
indicates that the program is activated and will open
at the appropriate time. The numbers across the bottom (
1
and
3
) indicate the programs the timer will execute.
MO
indicates what day today is.
Setting the Time
Press
PGM
once to enter Time Setting Mode.
The time setting mode indicator will flash to indicate that the
time and day are ready to be adjusted.
Press
HR
,
MIN
and
DAY
to set the current hour, minute and day respectively.
Press PGM after setting the time to enter the Program Setting Mode.
Programming the Timer
NOTE
: If you do not press a key for 15 seconds, the timer will
automatically return to the Normal Mode.
